The Global Tribune

Don’t want to miss this complete collection of solutions to the rotary packing machine

 Breaking News
  • No posts were found

Don’t want to miss this complete collection of solutions to the rotary packing machine

April 07
11:01 2021

Technology gives packaging a new look. Among them, the rotary bag given packaging machine has realized packaging automation for pharmaceutical, food, chemical and other enterprises. The operator only needs to put hundreds of bags in the bag magazine at one time, then the equipment machinery will automatically take the bags, print the date, open the bags, measure the signal to the measuring device, and then blanking, sealing and output. Customers can also add emergency safety door, automatic card feeding, abnormal discharge and other detailed functions according to the packaging needs. The whole process of packaging does not need manual operation, which effectively improves the production efficiency, saves the labor cost and management cost for the enterprise, and greatly reduces the cost.

In addition, the rotary pouch bag packaging machine can also achieve a multi-purpose machine, users only need to match different measuring devices according to different materials, can realize the automatic packaging of particles, powder, block, liquid and other products. Like below our chantecpack model:

1. The rotary chips multi head weighing packing machine with nitrogen flush

chips doypack bag packing machine

2. The premade zipper doypack pouch bag moringa/veterinary drugs powder packaging machine

the rotary powder packing machine

3. The laundry liquid/curry paste 8 station spout bag given filling machine

bag given liquid filling machine

Although the full-automatic bag given packaging machine has outstanding advantages, reasonable operation can bring many benefits to the enterprise, but in the actual operation process, the equipment also would have some faults due to the operation.

1. the membrane material is easy to offset and can not be fed normally when the equipment is working. How should we adjust in this case? Some technical personnel of the manufacturer indicated that if the membrane material offset is encountered in the equipment, the problem can be solved by adjusting the angle of the upper triangle plate if the position of the film coil and the tension balance bar are invalid.

Meanwhile, if the upper membrane material deviates from the clamping chain, the upper triangle plate can be adjusted clockwise; if the lower membrane material deviates from the clamping chain, the upper triangle plate can be adjusted in the anti clockwise direction.

2. the temperature rise of the compressor is slow or cannot rise to a higher temperature. What is the reason for this? It is reported that the heater line is the main power line through a magnetic absorption switch and then to the electric heating pipe, so in case of slow temperature rise of the shrinking machine or the failure to rise to a higher temperature, it is reported that the contact of magnetic suction switch shall be checked for normal.

Generally speaking, if the line fails to pass one of the phases, the above phenomena will occur; if the magnetic absorption switch is normal, the meter can be checked again to see whether the ohmic value of each phase is the same as that of the machine; if all phases are connected but the circuit or electric heating pipe is still abnormal, the heater needs to be replaced.

3. Uneven sealing or sealing. The reason for this fault is related to whether the heating time is adjusted well and whether there is impurity on the heating isolation cloth. The user needs to adjust the heating time and temperature. If there is any attachment on the heating isolation cloth, it is necessary to clean and replace it in time to prevent the normal operation from being affected.

The technical users in the workshop should not only fix the common faults and corresponding solutions for bag packing machine but also pay attention to the daily maintenance work after the use of the bag packing machine to ensure the next normal use of the equipment and prolong the service life of the equipment.

Media Contact
Company Name: HEFEI IECO INTELLIGENT EQUIPMENT CO., LTD.
Email: Send Email
Phone: +86 18656940167
Address:NO.02658 3# workshop 1st floor Changning Ave. High-tech district
City: Hefei
Country: China
Website: https://www.iecopacking.com/