Is Data Recovery Possible on an SSD?

Solid State Drive offers plenty of advantages over a Hard Disk Drive. SSD uses less energy, providing a faster loading speed that is perfect for our pc and laptops. But though the SSD is a reliable driver for storage, it has some malfunction as well. 

For a variety of reasons, SSD can damage, sustain, and fail. If your SSD gets failed, it can be a great loss for you. Mostly, you may think about your important business files that can be a high cost for you.

But luckily, there are some changes to recover SSD data. Plenty of data recovery companies provide SSD data recovery services.

But before relaxing, you need to understand that it is much more difficult to recover SSD data than HDD. So, you need to understand SSD basics to know the possibilities of recovering your SSD data.

Causes Of SSD Data Loss

Electronic Components Damages Frequent power cut-off, voltage up-down can damage strong devices.

Operating System Errors Corrupted software malfunctions operating system can damage SSD partition.

High Temperature Poor ventilation can make the SSD overheated, which can permanently damage your SSD.

User Error Accidentally drop coffee, water even drop the SSD when plugged in can cause internal damages.

Excessive Overwrite Excessive overwrite causes the drive unbootable.

Environmental Influences Fires, storms, floods may fail your whole pc or laptop.

Logical Failure Attack of a virus, unwilling format causes of data loss.

Manufacturing Default Sometimes, manufacturing firmware and poor or damaged parts causes SSD failure.

Common Sign Of SSD Failing

  • Bad blocks for saving files, low speed for copy or transfer files, files transfer failed.

  • Your computer showing a notification “file system requires repair.”

  • Crashes occur while booting & detect drive after a couple of reboots. 

  • When your SSD operates in “read-only mode.” 

  • A message appears “operating system not found.”

  • External USB drivers can not be detected. 

Identify The SSD Damage Level

SSD is faster than HDDs, but they are also subject to file damage and permanent failure. As you know, an SSD has no magnetic material to store data. 

So, it is more complex to recover data from a damaged SSD. The process starts with the evaluation of the damage level. For recovering data, it considers the issues with 2 levels. 

Level- 1:

Some physical assistance in the firmware may be required at level 1. Your files can recover with the help of some software. Even experts can access the SSD and fix the corrupted flash chips as well. 

Level- 2:

This is more complex to recover files and fix SSD for further uses. SSD can be damaged severely by electronic errors. So, the flash chips need to bring back and apply wear-level to fix it at this level. 

SSD Recovery Process

The chances of recovering data depend on its issues. If there are internal errors or damaged flash chips, it won’t be easy to recover data. Otherwise, in the case of bad blocks, software error and backdated firmware can be recovered. 

Here the process to how you can recover your SSD-

  • Format the Drive & Reinstall Operating System

  • Power Rebooting The SSD

If the reason is a power failure, then you can follow this method. First of all, unplug the SATA but not leave the power cable in. Then switch the power on for 30 minutes and turn it off for 30 seconds. After that, repeat it one more time and then turn the power on. Now plug in the SATA cable. 

  • Let the Boot Some Rest

  • Update SSD Firmware

  • Update Driver 


You may reaccess your data after the above process follows. But if your SSD in read-only mode or other complex issue arises, then go for an expert. Hopefully, they will prevent your complete data loss.

Media Contact
Company Name: Shah JI SEO
Contact Person: Danil Hikson
Email: Send Email
Phone: +92 306 1217725
Country: Pakistan