The Global Tribune

Knowing More Information About Mv Switchgear Up To And Including 52 Kv

 Breaking News
  • No posts were found

Knowing More Information About Mv Switchgear Up To And Including 52 Kv

November 30
15:06 2020
Up to and including 52 kV voltage range is generally referred to as “medium voltage”. This technical article shed some light on a few devices you are likely to spot in most of the medium voltage switchgears. But, before diving into technical details, it’s a good idea to remind people of important terms and definitions relating to MV switchgear.

Switching devices people are likely to spot in every medium voltage switchgear

Starting this article with a few basic terms used later. After, the seven most common MV switching devices will be explained in detail, referring to the ABB’s equipment as an example.

Basic terms (reminder)

Term № 1 – Disconnectors

Disconnectors are mechanical switching devices which provide an isolating distance in the open position. They are capable to open or close a circuit if either a negligible current is switched or if there is no significant change in voltage between the terminals of the poles.

Term № 2 – Isolating distances

Isolating distances are gaps of specified dielectric strength in gases or liquids in the open current paths of switching devices. They must comply with special conditions for the protection of personnel and installations and their existence must be clearly perceptible when the switching device is open.

Term № 3 – Switches

Switches are mechanical switching devices, which not only make, carry and interrupt currents under normal conditions in the network but also must carry for a specific time and possibly make currents under specified abnormal conditions in the network (e.g. short circuit).

Term № 4 – Switch disconnectors

Switch disconnectors are switches which satisfy the requirements for an isolating distance specified for a disconnector in their open position.

Term № 5 – Circuit breakers

Circuit-breakers are mechanical switching devices able to make, carry and interrupt currents occurring in the circuit under normal conditions, and can make, carry for a specified time and break currents occurring in the circuit (e.g. short circuit) under specified abnormal conditions.

Term № 6 – Earthing switches

Earthing switches are mechanical switching devices for earthing and short-circuiting circuits. They capable of carrying currents for a specified time under abnormal conditions (e.g. short circuit).

Earthing switches are not required to carry normal operating currents.

Term № 7 – Fuses

Good old fuses are switching devices that open the circuits in which they be installed by the melting of one or more parts specified and designed for the purpose of breaking the current when it exceeds a given value for a sufficiently long period.

Media Contact
Company Name: China AGP Electrical Co., Ltd.
Contact Person: AGP Electrical
Email: Send Email
Phone: 0086-13506671800
Country: China
Website: https://www.agpswitchgear.com/